Marion Elizabeth

Duraline Product Cam-lok Connectors

​

E1023 Series Single Pole Cam Type Latching Connectors

Field-Attachable, Shrink tube and Vulcanized Crimp and Double Set Screw 

(7:00  without video introduction)

 

JASON <v.o.>

Made in the USA. A statement in four words that embodies hundreds of years of drive and dedication to a nation. That rugged determination fostered quality products necessary

to thrive on our own. 

 

KATIE <v.o.>

In 1946 it cost 15 cents a gallon to fuel your car, and the shipbuilding industry in the North East was surging. J. B. Nottingham moved operations to Islip, NY, becoming the original supplier of safety engineered electrical distribution and temporary lighting systems to the U.S. Navy.

 

JASON <v.o.>

John Sclafani, current President and owner of what is now known as, Duraline, relocated to Florida in 2012. Taking advantage of a ready workforce, and incentives that may, or may not have included blue skies and palm trees of DeLand; quality and service remains steadfast. 

 

KATIE 

The world has evolved over the last 75 years, and Duraline's clients with it. Our engineers work with teams to fill aviation, entertainment, and shipyard ship to shore power, dress lighting, wind-power and power needs. The same standard that backs the defender of our coastlines, backs electrical, lighting, and power demands of your industry. 

 

JASON

Built to exceed all U.S. Navy specifications, the E1023 Shrouded Taper Nose/J series in-line latching Cam type connectors are available in vulcanized and field attachable styles. A positive connection is made through a unique latching design. (demo) Reverse it and insert into the female. It has a NEMA 4 watertight seal. 

The positive latching features come from the teeth inside the female and the blade of the male. So when the two are mated, (demo twisting and latch clicking) they will latch into place, and not back out. All three series are positive latching. 

 

*****GRAPHIC*****

Connectors Rated 690 amperes continuous, 1150 amperes intermittent 600 Volts AC/DC. Nema 4 Rated for Indoor/Outdoor Use, V-O Flammability rated (highest degree of protection available). Ship-to-shore latching Cam Connectors by Duraline are UL/cUL Listed 1691,  486A/B 

*****GRAPHIC*****

 

KATIE

Used in America's premier shipyards like Norfolk Naval, Portsmouth Naval shipyard, and Pearl Harbor, the E1023 features a new contact design that eliminates the possibility of contact rotation within the molded insulating sleeve. (demonstrating) It is ideally suited for a wide range of applications. 

 

These connectors feature a taper-nose style insulating hood and sleeve to allow a splash-tight seal between male and female contacts. The E1023 series comes in varying degrees of protective assemblies.

<point to> (demo)

We begin with loose connectors, which will get attached to the cable. To secure, they can be crimped, or use a double set screw. Once assembled, crimp styles can either be shrink-tubed with a hose clamp, or--upgrade your protection with a vulcanized assembly, where everything is sealed on the back end. 

 

Vulcanizing entails wrapping uncured rubber around the end of the sleeve and then a hand molding press will secure everything. You can do this at your location with a vulcanizing press, or Duraline can take care of that for you.

(demonstrating)

When you're ready to disconnect, simply unlock the connector by pressing the insulated external button. These connectors are heavy duty, completely insulated, and are vibration resistant, ensuring high conductivity and maximum efficiency.

Offering the most rugged protection, “X power” is our top of the line assembly. The contact is molded directly to the cable. With no separate sleeve, we literally connect it to the male contact, connect that to the cable, and mold the sleeve right over the cable and connector at the same time. 

 

By far this assembly will last the longest in this series. 

 

JASON

We have a variety of receptacles to distribute power.

(demo) 

They can be mounted on panels, electrical panels, power panel packs, distribution panels, generators, and battery backup. 

 

Available as a 15 , 30, and 90 degree female or male receptacle, the 15 degree can be equipped with a micro switch. This micro switch allows control of the circuit breaker. Until every connector is plugged in, the breaker will not activate. These would be the general use kind of receptacle. 

 

After general use, the heavy duty receptacles are used for shore power applications, pier power, and ship-to-shore power needs. (demo) These receptacles are the same as the general use receptacles, but you can tell they're much beefier. They're not going to break, they're going to last a lot longer.

 

KATIE

We have a “no cable” version. You can have a stud or a tapped hole. The cable version is molded directly to the cable. So, you get the water-tight seal, and you don't have to worry about anything breaking down inside the housing. We have female and male receptacles depending on what you need.

 

There are a variety of housing configurations, with in-house manufactured components. Our new standard came out in 2020. These housings are all stainless steel and powder coated, providing long-lasting, rugged protection.

 

Now this one here is a  “stud back” housing. It's a male 30 degree housing receptacle with color coded snap covers (demo) for each of the contacts. 

(point to) This one here would use “crimp lugs” on cable in order to connect to the back of blocks.

(demo)

This one is a female “on cable”, or the Male “on cable”. 

You have 30 degrees males, with buttons to undo the latches.

They come with protective caps or snap covers.

 

JASON

Here is a short block female receptacle with caps. 

We have top and bottom plates that come in different configurations.

They are available with snap covers or with caps. 

 

Everything can be customized with 8 standard colors. Housings can be configured with 3, 4 or 5 gang designs. Even mixing male and female blocks in the same housing is possible.

 

KATIE

For over 50 years, Duraline is the Original Preferred Standard used by Navy bases and shipyards to supply 3 phase power to ships at dockside. Keep your power needs running with 100% rubber molded sleeves to provide heavy duty, completely insulated connectors.

 

JASON

Those early times paved the way to today's diverse future. Duraline thrives today because MADE IN USA means quality, and home-grown workmanship.

Our products are 100% produced in DeLand, FL with the same quality that started in 1946.

 

KATIE

The workmanship that this nation was built upon manufactures the best of the best for the nation's defenses, and Duraline is ready to do the same for your needs. Throughout our entire process, 100% of our manufacturing pieces are tested, and then retested at each step

to ensure the highest quality.

Every client is part of our family, and we happily work with you. 

 

JASON

With the rugged demands of directing temporary power safely and effectively,

Duraline is the one to trust. “Plug us in for Safety” with original products that hold.